Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateTrusted Garage Door Opener Repair for Chesapeake Homeowners
A garage door opener that stops working turns your daily routine upside down. The car is trapped inside, the kids are waiting, and that faint click from the motor tells you something inside the unit has failed. We diagnose openers for a living, and our technicians have up to 13 years of experience across every major brand. That means we’re not guessing at your Genie or Craftsman unit. We know where the gears strip, where the logic board fails, and where the safety sensors quit talking to the motor. Fast diagnosis, lasting fix. We’re a single-trade garage door company, so 100% of our parts knowledge and training stays on this equipment. Same-day service is often available in Chesapeake, and estimates are always free. Call (866) 834-6826.

What Our Garage Door Opener Repair Service Includes
Openers fail in a handful of predictable ways, and each one calls for a different repair. Here’s what we handle under one focused roof, from a dead motor to a smart upgrade.
Opener Repair
Opener repair is the core of what we do: tracing why a motor won’t lift, won’t close, reverses halfway, or hums without moving the door. You need this when the door works by hand but the unit won’t drive it, or when the motor runs and the door stays put. We test the drive gears, the capacitor, the limit switches and the safety sensors, then repair the part that’s actually failing rather than swapping the whole unit.
Opener Installation
Opener installation replaces a dead or undersized unit with one matched to your door’s weight and track setup. It’s the right call when a motor keeps burning out, when the unit is loud enough to wake the house, or when a chain drive has simply reached the end of its life. We measure the door, confirm the horsepower you need, and install the new head unit, rail and safety reverse system so the door travels clean.
Smart Opener Upgrade
A smart opener upgrade adds phone control, scheduling and open/closed alerts to the door you already have. It fits homeowners who want to check the garage from work or let a delivery in without a key. We confirm your existing motor is compatible, then wire in the smart controller and set it up so it talks to your phone reliably.
Keypad Entry
Keypad entry gives you a code-based way in when the remotes are lost or the wall button is out of reach. It suits anyone who’s been locked out, or who hands a code to a house-sitter instead of a key. We mount the keypad, wire it to the opener and program a working code you can change later.
Remote Programming
Remote programming pairs a new or existing remote to your opener so it opens the right door, not the neighbor’s. You need it after buying a replacement remote, adding a second vehicle, or when a remote stops responding. We set the frequency, test range and confirm the safety reverse still works before we leave.
Battery Backup
Battery backup keeps the door working when the power drops, so you can still get the car out during an outage. It matters most for homes that rely on the garage as the main entrance. We install a backup unit matched to your opener and test it under load so it holds up when you actually need it.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Brands We Service for Garage Door Opener Repair
We work on your brand, and that’s a real advantage when a unit needs diagnosis. Craftsman openers show up on a lot of Chesapeake doors, and we know their logic boards and gear assemblies well enough to spot a failed part instead of a whole-unit replacement. Amarr and Wayne Dalton systems have their own quirks in how the head unit reads door weight, and we’ve learned where those units wear out first. Same with Raynor equipment, where the drive and travel limits tell you a lot about why a door reverses.
That brand fluency extends across the openers and doors we see most: LiftMaster, Chamberlain, Genie, Clopay and Raynor alongside the three above. We’re factory-familiar with eight major makes, so we diagnose by the way your specific system behaves rather than by guesswork. Whether you have Craftsman, Wayne Dalton, Amarr, Raynor or any other make, we can help.
Signs You Need Garage Door Opener Repair Right Now
Some opener problems are a nuisance. Others are a safety issue you shouldn’t put off. Here are the signals that mean it’s time to call.
- The motor hums but the door doesn’t move. That usually points to a stripped gear or a failed capacitor inside the unit. The motor is trying to work, but the drive can’t transfer the force, and running it this way can burn out the head unit.
- The door reverses before it closes. Safety sensors or limit settings are out of adjustment. A door that won’t close is a security gap, and it can also strain the opener every time it cycles.
- The door is much louder than it used to be. Grinding, rattling or a hard bang at the top of travel often means worn gears or loose hardware. Catching it early keeps a small repair from becoming a full replacement.
- The remote or wall button only works sometimes. Intermittent response can be a battery, a programming issue or a failing logic board. We test the signal path to find which one it is.
- The door won’t stay up, or drifts back down. On many openers this ties to the spring system or the opener’s force settings. It deserves a trained eye, because high-tension springs and the opener’s lift force work together.
Our Garage Door Opener Repair Process – Step by Step
- 1
We listen and confirm the symptom. We ask what the door does and when it started, then watch it cycle so we see the fault for ourselves. That first look narrows the likely cause before we open anything up.
- 2
We test the opener and the door separately. We disconnect the opener from the door to see whether the problem lives in the unit or in the door’s balance, springs and tracks. This step is what keeps us from repairing the wrong thing.
- 3
We diagnose the specific part. Using the brand’s known failure points, we check the gears, capacitor, logic board, safety sensors and limit switches in order. You get a plain explanation of what failed and why.
- 4
We quote before we touch a tool. You get an upfront price for the repair, and the price is quoted and agreed before any work starts. No surprise line items once the job is underway.
- 5
We repair, test and confirm the safety reverse. After the fix, we cycle the door several times and verify the safety reverse and force settings. The door should open smooth and stop and reverse as it should.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Opener Repair Cost in Chesapeake?
A typical opener repair in Chesapeake runs $120 – $320, depending on the part that failed and the brand of your unit. A straight sensor adjustment or remote reprogramming sits at the low end; a logic board or drive gear replacement sits higher. If the opener is beyond repair, opener installation runs $250 – $550, which covers the new unit and getting it dialed in to your door.

Here’s a quick look at the line items we work from, all typical estimated ranges:
| Service | Typical Estimated Range |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Track Realignment | $120 – $240 |
| Cable Repair | $130 – $250 |
| Roller Replacement | $110 – $220 |
What moves the number: the brand and age of the opener, whether the failure is mechanical or electronic, and whether the door’s springs or tracks are adding strain. To avoid overpaying, get the diagnosis and the price in writing before work starts, and be wary of anyone who quotes a full replacement before checking the actual part. Our estimate is free and spells out what’s included, and the written estimate sets the final price. Call (866) 834-6826 for an exact quote.
Garage Door Opener Repair Near Chesapeake – Our Service Area
We connect homeowners across the region with local garage door professionals, including Portsmouth, Virginia Beach, Norfolk, Suffolk, Carrollton, Benns Church, Hampton, Windsor, Smithfield, Bethel Manor and Carrsville. Response timing depends on the day and the job, and emergency service is available for openers that can’t wait. If you’re nearby and need garage door opener repair or help in Virginia Beach, we can point you to the right pro.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Garage Door Opener Repair in Chesapeake
Garage door opener repair is fixing the motor unit that raises and lowers your door, rather than replacing the door itself. It covers failed gears, capacitors, logic boards, safety sensors, limit switches and remote or keypad problems. We test the opener and the door separately to find the real cause, then repair the part that failed.
Most opener repairs take about an hour once we’ve diagnosed the fault, though a logic board or drive gear job can run longer. The diagnosis itself is usually quick because we know each brand’s common failure points. We’ll give you a realistic time when we quote the job. Call (866) 834-6826 to set it up.
Opener repair in Chesapeake typically runs $120 – $320, and a full opener installation ranges from $250 – $550. The exact figure depends on the part that failed and your unit’s brand. We quote and agree the price before any work starts, so there are no surprises. Call (866) 834-6826 for an exact quote – estimates are free.
We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment, along with other makes. We’re factory-familiar with these eight brands, so we diagnose by how your system actually behaves. If you’re unsure what you have, tell us the make on the unit and we’ll take it from there.
Yes, emergency garage door service is available for situations that can’t wait for a next-day appointment. A door stuck open or a unit that won’t secure the house after hours is the kind of call that qualifies. Call (866) 834-6826 and we’ll work out the fastest path to getting it fixed.
Repairs are backed by a satisfaction guarantee, and parts carry the manufacturer’s coverage where it applies. If something we fixed acts up again, call us and we’ll take a look. We stand behind the work and want the door running right.
Clear the area around the opener and the door so the technician can move freely, and have your remotes and keypad code handy. If you know the opener’s make and model, that speeds up the diagnosis. Then just show us what the door does when it misbehaves.
Schedule Your Garage Door Opener Repair Service in Chesapeake Today
If your opener is humming, reversing or refusing to move, don’t let it strand your car another day. We’re a garage door specialist with emergency service available, and we quote and agree the price before any work starts. Reach out to the team at Chesapeake Garage Door Repair Pros for a free, no-obligation estimate. Call (866) 834-6826.
Written by the team at Chesapeake Garage Door Repair Pros.
Looking for related help? We also handle garage door opener repair topics in depth, and if you’re in Virginia Beach we’ve got garage door opener repair covered there too.